phone : +603 - 7804 8333 / 8118 / 2911
banner_1 banner_2 banner_3 banner_4 banner_5 banner_6 banner_7
  • Portable Induction Heater TIH 030m





Small bearing heater with high heating capacity of up to 40 kg bearing  

The SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions: 230V/50-60Hz and 100-110V/50-60Hz.   
Compact lightweight design; just 20,9 kg (46.0 lb) facilitating portability
2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
Capable of heating a 28 kg (61.7 lb) bearing in just 20 minutes
Temperature mode pre-set at 110 °C (230 °F) to help prevent bearing over-heating
Automatic demagnetisation
3 years warranty
  SKF m20 concept
"m20" represents the weight (kg) of the heaviest SRB 231 bearing which can be heated from 20 to 110 °C (68 to 230 °F) in 20 minutes. This defines the heater's power output instead of its power consumption.  
 A  Induction coil outside the heater's housing allows shorter heating time and lower energy consumption
 B Foldable bearing support arms facilitate the heating of larger diameter bearings
 C Magnetic temperature probe helps prevent bearing overheating
 D Easy-to-use control panel and LED display integrated in a remote control
 E Internal storage for all 3 yokes reduces the risk of yoke damage or loss
 F Integrated carrying handle facilitates portability
 Technical data
 Designation TIH 030M/230V
  TIH 030M/110V
 SKF m20 performance 28 kg (61.7 lb)
 Voltage, V/Hz
230V/50-60Hz or 
 Work piece:
 - Maximum weight 40 kg (88 lb)
 - Maximum bore diameter 20 - 300 mm (0.8 - 11.8 in)
 Temperature control:
 - Range 0 - 250 °C (32 - 482 °F)
 - Magnetic probe Yes, K-type
 - Accuracy (electronics) ± 2 °C (± 3.6 °F)
 Time control:
 - Range 0 - 60 minutes
 - Accuracy ± 0,01 sec.
 Maximum temperature (approx.) 400 °C (750 °F)
 Thermometer mode Yes
 Bearing mode Yes
 Power setting 2-step; 50% or 100%
 Demagnetisation according to 
 SKF norms (automatic)
Yes (<2 A/cm)
 Can heat sealed bearings Yes
 Can heat pre-greased bearings Yes
 Error guiding codes Yes
 Thermal overload protection Yes
 Control panel
Control panel and LED display 
integrated in remote controle
 Operating area (w x h) 100 x 135 mm (3.9 x 5.3 in)
 Coil diameter 95 mm (3.7 in)
 Dimensions (w x d x h) 450 x 195 x 210 mm 
(17.7 x 7.6 x 8.2 in)
 Total weight, including yokes 20,9 kg (46.0 lb)
 Maximum power consumption 2,0 kVA
 Standard yokes
45 x 45 x 215 mm 
(1.7 x 1.7 x 8.4 in), 
for heating bearings with bore 
diameter of 65 mm (2.6 in) 
and larger.
  28 x 28 x 215 mm 
(1.1 x 1.1 x 8.4 in), 
for heating bearings with bore 
diameter of 40 mm (1.6 in) 
and larger.
  14 x 14 x 215 mm 
(0.5 x 0.5 x 8.4 in), 
for heating bearings with bore 
diameter of 20 mm (0.8 in) 
and larger
 Core cross section 45 x 45 mm (1.7 x 1.7 in)
 Bearing support arms Yes, foldable
 Yoke storage
Yes, internal integrated in
foldable bearing support arms
 Cooling fan No
 Swivel arm No
 Housing material Steel and glass filled polyamide
 Warranty period 3 years
 More information
 Brochure Instructions for use

Write a review

Note: HTML is not translated!
    Bad           Good

Portable Induction Heater TIH 030m

  • Product Code: ---
  • Availability: In Stock

Our Brands