phone : +603 - 7804 8333 / 8118 / 2911
banner_1 banner_2 banner_3 banner_4 banner_5 banner_6 banner_7
  • OilCheck monitor TMEH 1

 

 

 

Detects changes in oil condition
 
The OilCheck detects and measures the dielectric constant of oil. By comparing the measurements obtained from used and unused oils of the same brand, the SKF OilCheck is able to determine the degree of change in the condition of the oil. Dielectric change is directly related to the degradation and the contamination level of the oil and will allow the user to achieve optimised intervals between oil changes and detect increased mechanical wear and loss of the oils lubricating properties. To facilitate trending the instrument is equipped with a numerical read-out.
 
Warning
The SKF OilCheck is not an analytical instrument. It is an instrument to detect only changes in the oil condition. The visual and numerical read-outs are purely a guide to enable trending of the comparative readings of a good oil to a used oil of the same type and brand.
 
Shows changes in oil condition affected by such things as:
Water content
Fuel contamination
Metallic content
Oxidation
Hand held and user friendly
Numerical read-out to facilitate trending
 
Technical data
Suitable oil types mineral and synthetic oils
Repeatability better than 5%
Read-out green/red grading + numerical value (0 - 100)
Battery 9V Alkaline IEC 6LR61
Battery lifetime > 150 hours or 3.000 tests
Dimensions 250 x 95 x 32 mm (9.8 x 3.7 x 1.3 in) (instrument)
 
 More information
Instructions for use

Write a review

Note: HTML is not translated!
    Bad           Good

OilCheck monitor TMEH 1

  • Product Code: ---
  • Availability: In Stock

Our Brands