phone : +603 - 7804 8333 / 8118 / 2911
banner_1 banner_2 banner_3 banner_4 banner_5 banner_6 banner_7
  • Machinery shims TMAS series

 

 

 

Machinery shims TMAS series
 
 
For accurate vertical machinery alignment
 
Accurate machine adjustment is an essential element of any alignment process. SKF single slot pre–cut shims are available in five different dimensions and in ten different thicknesses.
 
Made of high quality stainless steel, allowing re–use
Easy to fit and to remove
Close tolerances for accurate alignment
Thickness clearly marked on each shim
Fully de–burred
Pre–cut shims are supplied in packs of 10 and complete kits are also available
 
 
 Contents TMAS shim kits
 Designation TMAS 340
 Thickness (mm) 0,05 0,10 0,20 0,25 0,40 0,50 0,70 1,00 2,00
 Size (mm) Quantities:
 100x100 20 20 20 20 20 20 20 20 10
 125x125 20 20 20 20 20 20 20 20 10
 Designation TMAS 360
 Thickness (mm) 0,05 0,10 0,25 0,50 1,00 2,00
 Size (mm) Quantities:
 50x50 20 20 20 20 20 20
 75x75 20 20 20 20 20 20
 100x100 20 20 20 20 20 20
 Designation TMAS 510
 Thickness (mm) 0,05 0,10 0,20 0,25 0,40 0,50 0,70 1,00 2,00
 Size (mm) Quantities:
 50x50 20 20 20 20 20 20 20 20 10
 75x75 20 20 20 20 20 20 20 20 10
 100x100 20 20 20 20 20 20 20 20 10
 Designation TMAS 720
 Thickness (mm) 0,05 0,10 0,20 0,25 0,40 0,50 0,70 1,00 2,00
 Size (mm) Quantities:
 50x50 20 20 20 20 20 20 20 20 20
 75x75 20 20 20 20 20 20 20 20 20
 100x100 20 20 20 20 20 20 20 20 20
 125x125 20 20 20 20 20 20 20 20 20
 
 Technical data
 Designation Number 
of shims 
per set
A B C Thickness
mm mm mm mm
 TMAS 50-005 10 50 50 13 0,05
 TMAS 50-010 10 50 50 13 0,10
 TMAS 50-020 10 50 50 13 0,20
 TMAS 50-025 10 50 50 13 0,25
 TMAS 50-040 10 50 50 13 0,40
 TMAS 50-050 10 50 50 13 0,50
 TMAS 50-070 10

Write a review

Note: HTML is not translated!
    Bad           Good

Machinery shims TMAS series

  • Product Code:
  • Availability: In Stock

Our Brands