|
SKF BEARING HEATER TIH 210M
TIH 210m Induction Heater
Heating a 210 kg bearing now takes as long as a coffee break
The SKF TIH 210m is an extremely efficient large-size induction heater, which is capable of heating a 210 kg (460 lb) bearing in just 20 minutes. This incredible speed is achieved by positioning the induction coil outside the heater's housing, allowing the bearing to be placed around the coil. This significant innovation results in reducing heating time and power consumption by up to 30%, ultimately saving up to 50% on heating costs.
Placing the induction coil outside the heater's housing reduce heating time and power consumption by up to 30%, ultimately saving up to 50% on heating costs.
4-step power reduction, heats smaller bearings just as quickly but at lower power consumption.
Thermal overheating protection protects the induction coil and the electronics.
Temperature mode pre-set at 110 °C (230 °F), preventing bearing over-heating.
Temperature and time modes for heating components other than bearings.
Automatic demagnetisation.
Supplied standard with 2 yokes.
Internal yoke storage reduces the risk of yoke damage or loss.
Compact, lightweight design; just 75 kg (165 lb) including two yokes.
Three-year warranty.
Also available standard equipped with a cooling fan, TIH 210F, allowing continuous use
SKF m20 concept
"m20" represents the weight (kg) of the heaviest SRB 231 bearing which can be heated from 20 to 110 °C (68 to 230 °F) in 20 minutes. This defines the heater's power output instead of its power input: kVA.
A Induction coil outside the heater's housing
Reduces heating time and energy consumption by 80%
Reduces heating cost by 70%
B Magnetic temperature probe
Monitors bearing temperature during heating
C Operating panel
Keyboard with LED
Temperature mode pre-set at 110 °C (230 °F), helps preventing bearing overheating
D 4-step power reduction
Heats smaller bearings just as quickly but at lower power consumption
E Integrated carrying handles
Provide excellent grip when moving the heaters around
F Internal yoke storage
Storage for the extra yokes reduces the risk of yoke damage or loss
Technical data
Designation TIH 210m
Description Large size induction heater
SKF m20 performance 210 kg (460 lb)
Voltage, V/Hz Self-adjusting; 400/50 - 460/60
Work piece
- Maximum weight 300 kg (660 lb)
- Maximum bore diameter 60 - 600 mm (2.4 - 24 in)
Temperature control
- Range 0 - 250 °C (32 - 482 °F)
- Magnetic probe Yes, K-type
- Accuracy (electronics) ± 3 °C (± 5 °F)
Time control
- Range 0 - 60 minutes
- Accuracy ± 0,01 sec.
Maximum temperature (approx.) 400 °C (750 °F)
Thermometer mode Yes
Bearing temperature preset Yes
Power reduction 4-step; 20-40-60-80%
Demagnetisation according to
SKF norms (automatic) Yes (<2 A/cm)
Can heat sealed bearings Yes
Can heat pre-greased bearings Yes
Error guiding codes Yes
Thermal overload protection Yes
Max
|
Adhesives (4) 
